How To Disassemble The Spray Can And Reuse It?

How To Disassemble The Spray Can And Reuse It?

After use, push the tray from the top of the vacuum spray bottle to the bottom. It is best to use a hard and slender object that is longer than the bottle. Be careful during the whole process, don't hurt yourself, don't block the small hole in the bottom of the bottle when you top it, and clean the spray bottle before putting something new in it.

In the process of using a vacuum spray bottle, the contents inside will be squeezed out by pressing, and then the piston at the bottom will continue to run up with continuous pressing. When the contents inside are used up, the piston has reached the bottom of the bottle. top. If we want to continue to use the vacuum spray bottle, we need to push the piston back to the bottom.

When the piston is pushed to the top, we can remove the pump head first, and then use a slender object to push the piston to the bottom, and then reinstall the pump head for repeated use.

The contents of the vacuum spray bottle will be isolated from the outside air, which can prevent the product from being polluted, and it will be safer and hygienic to use. You don't have to worry too much about the problem of product contamination and breeding of bacteria.
Although vacuum spray bottles can be reused, we cannot use them all the time and need to be replaced regularly. And every time you reuse it, you need to pay attention to the hygiene of the vacuum spray bottle. It needs to be thoroughly cleaned before you can put things in it, otherwise it is easy to breed bacteria.

How to open the aluminum spray bottle?

1. First open the bottle cap of the spray, pull it out or unscrew it.

2. If you want to open the whole bottle, you need to use a tool to pry it open.

3. With a pair of sturdy scissors stuck in the spray head, forcefully pry the bottle upwards.

4. The nozzle of the spray bottle has been removed, and you can see that the core is a hose.

5. Use scissors to cut off the hose core to open the bottle, and cut off the hose core to pour out the liquid inside.