Talking About The Quality Requirements Of Cosmetic Packaging Materials

Talking About The Quality Requirements Of Cosmetic Packaging Materials

Cosmetic packaging materials are divided into inner packaging and outsourcing, and can also be divided into soft packaging and hard packaging. The quality of packaging materials directly determines the product brand image. Its basic quality requirements are for your reference:

First, the basic requirements for containers and container supporting packaging materials:

1. bottle

The body of the bottle should be stable, the surface should be smooth, the thickness of the bottle wall should be basically uniform, there should be no obvious scars or deformations, and there should be no cold bursts or cracks. The mouth of the bottle should be straight and smooth, no burrs (burrs) should be used, and the thread and bayonet fitting structure should be intact and straight. The fit between the bottle and the cap should be tight, without slipping, loosening or leakage. The inside and outside of the bottle should be clean.

2. Hose

The tube body of the hose should be smooth, clean, uniform in thickness, without obvious scratches, and the color should be uniform. The sealing of the hose should be firm and correct, and there should be no openings or wrinkles (except for the normal indentation of the mold). The composite film of the hose should have no floating phenomenon.

3. Cover

Inner cover: The inner cover should be complete, smooth, clean and free from deformation. The inner cap should fit well with the bottle and outer cap. The inner cover should not be left out.

Outer cover: The outer cover should be upright, smooth, free of breakage, cracks, and burrs (burrs). The color of the outer cover should be uniform. The thread matching structure of the outer cover should be intact, and the color of the outer cover with anodized aluminum or bronzing should be uniform.

The flip-top cover should be turned up flexibly, and the connection parts should not be broken. The fit between the cap and the bottle should be tight without slipping or loosening.

4. Spray cans.

The tank body is flat, without rust spots, the weld seam is smooth, there is no obvious scratch or concave tank phenomenon, and the color and luster should be uniform. The mouth of the spray can should be smooth, without wrinkles, cracks and deformation. The cover of the spray can should meet the requirements of 5.3.2.

5. Nozzle.

The nozzle should be upright, clean and free from damage and cracks. The assembly parts of the nozzle should be intact to ensure smooth spraying.

Second, the basic quality requirements of flexible packaging.

1. Bag

Bags should not have obvious wrinkles, scratches, or air bubbles. The color of the bag should be uniform. The seal of the bag should be firm, and there should be no opening, perforation, or leakage (paste). The compound bag should be compounded firmly and evenly coated.

2. Plastic seal

The plastic seal should be firmly bonded without cracking. The surface of the plastic seal should be clean and free from damage. There is no wrong loading, missing loading, or reverse loading in the plastic package.

Third, the basic requirements for cosmetic packaging materials.

1. Spindle tube

The body of the ingot tube should be straight, smooth, free of cracks, burrs (burrs), no obvious scratches, and the color should be uniform. The fit of the parts of the ingot tube should be tight enough to ensure that the contents can be unscrewed or pushed out normally.

2. Cosmetic pencil

The pen holder and pen cover of the cosmetic pen should be smooth and straight, with no glue and no cracking of the paint film. The barrel of the cosmetic pen and the pen cover should be tightly matched. The color of the makeup pencil should be uniform.

Fourth, the basic quality requirements of the outer packaging.

1.box

The surface of the box should be smooth and straight, and there should be no obvious bottom scratches, burrs (burrs), severe compression and damage. The tightness of the opening of the box should be appropriate. When taking out the flower box, do not use your fingers to forcibly peel it off, so as to pinch the edge of the cover and the bottom does not fall off automatically. The mirror inside the box, the contents and the box should be firmly pasted, the mirror image should be good, and there should be no scratches or damage on the bottom.

2. Printing and labeling.

The patterns and writings printed on cosmetic packaging should be neat, clear, not easy to fall off, and the color should be uniform. Cosmetic packaging labels should not be wrongly posted, missed, or upside down, and should be firmly pasted. Labeling requirements are in accordance with GB 5296.3.

3. Flower box.

The flower box should be tightly matched with the middle box packaging. The flower box should be clean, upright and flat, with a good lid and no wrinkles, missing edges or corners. The adhesive parts of the flower box should be firmly pasted, without pasting marks, cracks and mutual adhesion. There is no wrong loading, missing loading, or flipping of the product.

4. Middle box

The middle box should be tightly matched with the flower box packaging. The middle box should be clean, straight and flat, and the box cover should be closed. The adhesive parts of the middle box should be firmly pasted, without pasting marks, cracks and mutual adhesion. There is no wrong loading, missing loading, or flipping of the product. The middle box label should be correct, clean and complete, and should indicate the product name, specification, boxed quantity and producer name as required.

Fifth, the basic quality requirements for transport packaging

The transportation package should be neat, correct and smooth, and the box should be firmly sealed. There is no wrong loading, missing loading, or flipping of the product. The marks on the transport packaging should be clear, complete, and in a suitable position, and if necessary, should indicate the product name, manufacturer’s name and address, net content, product quantity, full box weight (gross weight), volume, production date and shelf life or production batch number and expiration date date of use.